ALLU has taken the decision to further develop and strengthen the cooperation with its Partners at the BAUMA exhibition in October instead of exhibiting.
The background to this decision is based on current global events and industry information. By taking this action, ALLU will strengthen the support to their local/international business partners.
ALLU is delighted to launch the NEW ALLU RAPTOR for the American market. The versatile, robust and practical design of the ALLU Raptor series make them the essential tool for severe dismounting material applications, where productivity and reliability are vital.
ALLU has developed new series of high-performance vibratory machines. Denominated as “ALLU Raptor Series”, ALLU RAPTOR is designed to be used in any application, where the highest production rates are required, as well as continuous work shifts, where the reliability and comfort of working with the excavator are of vital importance. The
vibratory technology and the mechanics, provide a greater impact at a lower frequency. This means higher production, reduced wear, and lower operator fatigue.
Edgar Chavez, President ALLU Inc : “ALLU is delighted to introduce our Raptor Series to North American market, providing you with an extra attachment to bring together our ALLU portfolio for all your jobsite needs in the Americas”
ALLU RAPTOR performance is guaranteed to excite you.
ALLU VELOCI is designed for compact size excavators, loaders, telehandlers, tractors, and skid steers.
ALLU is delighted to launch the NEW ALLU VELOCI Series for compact sized excavators, loaders, telehandlers, tractors, and skid steers. The shell of the ALLU VELOCI screening bucket is made from steel with fully welded joints. This construction has been tested and guaranteed for the maximum operating load.
ALLU VELOCI‘s screening stars are made from polyurethane material which allows the material to fall through without crushing or shredding material. Large material and debris is left in the bucket while separated from reusable material. This feature is especially handy with composting when the vegetation is left in the bucket and separated from the reusable material rather than being shred into the end product.
ALLU VELOCI screening buckets are designed for maximum efficiency. The ALLU VELOCI screening stars create a rotating motion inside the bucket, screening and mixing the material, producing a quality end product for use.
Jeroen Hinnen ALLU Global Sales Director; Its an exciting time, ALLU Introducing the new VELOCI, tailored for smaller excavators. ALLU VELOCI will strengthen our support to our customers and operational presence. Sales will start in selected European countries.
The ALLU VELOCI Series are available in 5 different size models for a variety of screening, mixing, and aerating applications. All models are equipped with two hydraulic motors for maximum processing power. The ALLU VELOCI have a double-skin floor, making them robust and durable even in demanding environments and with demanding materials.
MAIN APPLICATION AREAS:
►Landscaping
►Utility contracting
►Recycling plants
►Plant hire & rental
| Name of Exhibition | Date | Web address | Location |
| Maamess 2022 | 21st April 2022 | https://maamess.ee/en/ | Tartu, Estonia |
| Planet Mountain | 26th April 2022 | https://www.mountain-planet.com/en/2022-2/ | Grenoble France |
| Tiefbau Live | 5th May 2022 | https://www.tiefbaulive.com/de/ | Karlsruhe Germany |
| Svenska Maskinmässan | 2nd June 2022 | www.maskinmässan.se | Stockholm Sweaden |
| Shenzhen dredging | 13th June 2022 | Shenzhen, China | |
| Shenzhen Expo | 14th June 2022 | https://gz.ie-expo.cn/ | Shenzhen, China |
| Hillhead | 21st June 2022 | https://www.hillhead.com/ | Hillhead Quarry Buxton UK |
| VDBUM | 19th July 2022 | https://vdbum.de/grossseminar/50-vdbum-seminar/ | Hessen Germany |
| Metko | 1st September 2022 | www.metko.fi | Jamsa, Finland |
| GalaBau | 13th September 2022 | https://www.galabau-messe.com/ | Nürnberg Bayern |
| Made In Finland/ Doosan dealer | 23rd September 2022 | www.mansenmorinat.fi | Lempäälä Tampere |
| BAUMA Germany 2022 – with ALLU partners | 24th October 2022 | https://bauma.de/en/ | Munich, Germany |
| BAUMA China 2022 | 22nd November 2022 | https://www.b-china.cn | Shanghai, China |
| IE Expo | pending | https://www.ie-expo.cn/Home | Shanghai, China |
| Con Expo Las Vegas | 14th March 2023 | www.conexpoconagg.com | Las Vegas |
ALLU is delighted to introduce Merja, the Finance Controller for ALLU Group. She will be leading as Finance Controller for our ALLU Entities. Merja started her career over 20 years ago. Graduating with a Finance degree, she has worked for a few different European companies in Finance and also is a qualified Primary Nurse! Merja brings a solid International Finance background to her new role at ALLU.
Merja says: “My first month at ALLU has felt like coming home. It’s a great family style culture and I have felt really integrated. I am able to shape and transform the direction we are taking and it’s a really exciting challenge. When I am not at work, I enjoy various crafts, reading and watching movie, crime series. I have also recently taken up going to the gym. I am really excited to be at ALLU and working with you all”.
We are all aware of the environmental impact of coal ash in the USA. With potential hazards to both the air and water being a concern to all parties involved. Loose particles of fly ash can float in the air to surrounding communities, causing various respiratory issues to nearby residents. Both abandoned and operational ash ponds have a high potential to seep into the groundwater carrying chemicals such as lead, arsenic and mercury to the municipal water supply.
What to do with these ponds has been at the center of much debate throughout the power generation providers along with environmental advocates. Finding an acceptable solution that would provide a safe permanent, solution that was economically feasible has been a challenge. The EPA permits two methods, closure in place and closure by removal. Each method presents it’s own challenges and downsides.
Closure in place or “capping” the pond is typically done using a process known as “bucket mixing” which is accomplished by dumping sacks of powdered binder (usually Portland Cement) onto the surface of the pond (NON-METERED). The binder is then mixed using the buckets of a tracked excavator. A shallow cap is formed as the cement hardens. Though much less expensive than removal. The main problem exists beneath the “cap” moisture remains in the unstable contaminated soil allowing continued seepage into the groundwater. The capped ground is unsuitable for building and difficult to repurpose. Additional dust pollution is also created during the bucket mixing process.
Closure by removal minimizes the overall risk of ground water pollution but presents it’s own set of problems. Compared to closure in place costs, removal costs and time can add up to more than five times that of in place closure. Relocation to an approved dump site (land fill) may also prove difficult with dust and contaminates being released during transport. Regulation of the dump site can also be difficult. If not properly maintained these sites can be affected by the wind carrying the reclaimed dust great distances. Storm water can seep through the ash and continue to contaminate ground water.
Deep pond stabilization provides an innovative solution that solves problems present in both capping and removal. The ALLU Soil Stabilization System has been used throughout Europe for more than a decade. The system uses a powerful mixing head attached to the boom of a mid sized excavator. The mixing head is fed a dry binder by a computer controlled high pressure feeder creating a homogeneous mix. Unlike bucket mixing; the system is capable of depths beyond 20’. The ash pond is stabilized from the bottom up and not just at the surface. The feeding system regulates with precision the exact amount of binder prescribed by the engineer to fully encapsulate the contaminated site. (BINDER COST CONTROLLED)
Area is stabilized from bottom up
As it is now a solid mass. Potential ground water contamination along with dust pollution from wind, rain or during transportation are eliminated. Costs are controlled by removing the need to build and maintain dump sites. Less fossil fuels are used without the need to transport to an off site location. A solid surface remains that continues to harden over time allowing a re-purposing of the existing ash containment pond. A truly green sustainable solution. For further information on ALLU Soil Improvement System click here
ALLU is delighted to launch the NEW ALLU TRANSFORMER DC Series for the Chinese market. ALLU opened its new Chinese manufacturing plan in 2021, after listening to the needs of customers. It was clear ALLU needed a local facility to grow and support our Chinese customers. Investing in a local manufacturing facility has enabled ALLU to make products tailored to the local market requirements.
Operations Director for China Pierre Bujes says: ALLU have heavily invested in China and listened to our customers in China. Introducing the new DC Series, which ALLU have tailored just for the Chinese market this will strengthen our support to our customers and operational presence, to help grow the region whilst being competitive in the local market”
The ALLU Transformer DC Series are reliable screening attachments for a variety of screening, crushing, mixing, and aerating applications. All models are equipped with two hydraulic motors for maximum processing power. The attachments have reinforced
sides, making the bucket robust and durable even in demanding environments and with demanding materials.
The main areas of application for the ALLU TRANSFORMER DC Series are:
The ALLU TRANSFORMER DC Series offers two different blade options. Equipped with TS blades, the ALLU Transformer DC Series are perfect for applications that require screening, separation, and aeration. The TS blades rotate between the screening combs, and the final fragment size is 25-50mm. This structure is unique in that the fragment size of the final product can be changed by repositioning the screening combs. This allows you to get two fragment size variations with the same ALLU TRANSFORMER DC SERIES at no extra cost.
Equipped with X-blades, the ALLU TRANSFORMER DC SERIES attachments are perfect for applications requiring stabilization, mixing, aeration and crushing. The structure is clog-proof and the capacity remains superb even with wet materials. Thanks to the design, the ALLU TRANSFORMER DC SERIES with X-blades are well suited for even the most demanding mixing and pulverizing tasks.
ALLU is delighted to introduce Daniel, the Production Supervisor for China. He will be leading ALLU China production of the new DC series. Daniel started his career over 20 years ago and has worked for a few different European companies. Daniel has managed production in factories and for various organisations and has experience of growing the Chinese market.
Daniel says; My first few months at ALLU has been fantastic. I’m able to shape the direction of the production facility for the Chinese market, and it is an exciting challenge. ALLU has welcomed me to the family style culture and sense of teamwork with everyone going in the right direction. When I am not at work, I love to play basketball and go fishing. We have a clear direction and a lot of potential for the Chinese market. I am excited to be working with you all”.
ALLU is delighted to introduce Pierre, our New Operations Director for China. He will be leading our ALLU China operations and manufacturing facility. Pierre started his career over 25 years ago with Schneider Electric in commercial contracts. For the last 20 years he has worked in China a cross the chemical industry. Pierre has managed finance and general management for factories working alongside with customers across various industry sectors in Asia, before moving into consultancy for business transformation.
Pierre has a passionate entrepreneurial style and the experience of growing the Chinese market.
Pierre says; The opportunity to join ALLU and grow the Chinese market is an exciting challenge. ALLU has welcomed me to the family style culture and sense of teamwork with everyone going in the right direction. When I am not at work, I love to play tennis and go travelling mountaineering. We have a clear direction and a lot of potential for the Chinese market. We will be growing our team, and developing our network, helping to improve the customer experience, I am excited to be working with you all”.
ALLU announced today that it has acquired a business license in China to establish its own entity to manufacture and operate from. This expansion reflects the strategic commitment to enhance our global leadership position and provides a premier experience to our customers.
Expanding our strong position in the Chinese market, is key to ALLU’s strategy. It provides a unique opportunity to deploy our ALLU management system to create value through operational excellence.
Peter Grönholm, Managing Director said “The opportunity for growth and manufacturing in China is fantastic. We have a clear strategy and are continuously developing our network and always looking at improving to help the customers’ requirements. Our people are at the heart of what we do; and safety is one of our key values. The new operational facility gives us the strength we need to invest in the future for the region by providing competitive products”
ALLU China Co., Ltd. (阿陆环保科技（昆山）有限公司) is headquartered in Kunshan, China, and shall be recruiting in the short-term for its manufacturing site.
For further information or if you are interested in becoming a dealer for ALLU in China please contact us