Fallstudie

ALLU TRANSFORMER – BRECHEN VON ZIEGELN

Finland

Material Defective bricks

Industrie Industrielle Anwendungen, Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Crushing

Funktion Crushing, Screening, Waste material handling, Industrial applications

Modell ALLU Transformer DH 4-17 screener crusher with X75 blades

Problem

A certain amount of waste and rejects is endemic in the production of bricks, requiring an effective solution for the recycling of any found to be defective.

Solution

The defective bricks were crushed with an ALLU Transformer screener crusher with the crushed material being reused in brick production.

Benefit

By processing the material with an ALLU Transformer screener crusher, any defective bricks can be reused in the production process. The ALLU Transformer screening bucket is a mobile solution, which in this instance replaced a large and ineffective stationary crusher on site.   TRANSFORMING YOUR MACHINES.

Related Products

Fallstudie

ALLU TRANSFORMER – ZERKLEINERN VON RINDE

Finland

Material Field bark from logs at a sawmill

Industrie Industrielle Anwendungen, Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Crushing

Funktion Crushing, Screening, Waste material handling, Industrial applications

Modell ALLU Transformer DS 4-23 screener crusher with crushing XHD blade setup

Problem

Field bark that has gathered at a sawmill’s field from processed logs has become a problem. If it is treated as waste the sawmill will be liable to both transport and landfill costs.

Solution

The material is fine screened with an ALLU Transformer screener crusher and then used at a local power plant. The quality is important, as if it is to be used as a power source, the material cannot include stones, metal or any other contaminants.

Benefit

An ALLU Transformer screener crusher bucket is a one-step process where the crushing of field bark and loading can be done simultaneously. When attached to a wheel loader for instance, both mobility and processing efficiency are maximized.   TRANSFORMING YOUR MACHINES.

Related Products

Fallstudie

ALLU TRANSFORMER – SCHREDDERN VON BAUMRINDE

Japan

Material Field bark at a sawmill

Industrie Industrielle Anwendungen, Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Crushing

Funktion Crushing, Screening, Waste material handling, Industrial applications

Modell ALLU Transformer DN 2-12 with TS35 Axe blades

Problem

Field bark had accumulated at a sawmill’s field from processed logs. If this were to be treated as waste, the sawmill would be faced with high transport and landfill costs.

Solution

Field bark can be further utilized and resold. In order to generate an income from it, the field bark must be shredded into fine and homogenous pieces. This can be achieved with an ALLU Transformer screener crusher bucket.

Benefit

An ALLU Transformer screener crusher is a cost-efficient and mobile solution ideal for use in a limited space as found at the sawmill site. The end product produced is of a high quality and homogenous making an ideal product for resale.   TRANSFORMING YOUR MACHINES.

Related Products

Fallstudie

ALLU TRANSFORMER – QUALITÄTSSICHERUNG IN DER BETONPRODUKTION

Finland

Material Sand and gravel, crushed gravel

Industrie Industrielle Anwendungen, Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Crushing

Funktion Crushing, Screening, Industrial applications

Modell ALLU Transformer screener crusher DN 3-17 with TS 16 blades

Problem

Quality assurance and control in concrete production are important. This involves dealing with lumped, hardened, and frozen sand and gravel that comprised of lumps too big to be fed into the feeder silo at the concrete plant.

Solution

The frozen and hardened sand, gravel and rocks can be crushed with an ALLU Transformer screener crusher before being fed into the silo. This step ensures that the feeder doesn’t get blocked due to the presence of large lumps meaning that the quality of the concrete remains consistent.

Benefit

Quality assurance through the use of the ALLU Transformer screening bucket ensures that the production process is made more efficient, with no stoppages. Also, all materials can be used on the production due to the transforming nature of the ALLU equipment.   TRANSFORMING YOUR EFFICIENCY.

Related Products

Fallstudie

ALLU TRANSFORMER – VERFÜLLUNG ROHRLEITUNGSGRABEN

Sweden

Material Soil

Industrie Auffüllen von Rohrleitungen, Sieben

Anwendungsbereich Pipeline padding

Funktion Pipeline padding, Screening

Modell ALLU Transformer DSB 3-12 screener crusher with TS 25 blade setup

Problem

Pipeline required backfilling and refilling the pipeline with new material would have caused additional costs for the project.

Solution

 The excavated material from the pipe trench was screened back to the trench with the ALLU Transformer screener crusher and the original material was used as backfilling. The ALLU Transformer screener bucket was able to screen reusable material for pipeline backfilling, meaning no additional material costs.

Benefit

By re-using the material on site, there were no need to buy virgin material. ALLU Transformer screener bucket made the job efficient and saved on natural resources. The job site traffic was also minimized due to utilizing the existing material with only one machine.  

Related Products

Fallstudie

ALLU TRANSFORMER – BELÜFTEN VON KOMPOST

Sweden

Material Wet sludge

Industrie Belüften, Kompostieren, Mischen, Sieben, Zerkleinern

Anwendungsbereich Aerating

Funktion Aerating, Composting, Crushing, Screening, Mixing

Modell ALLU Transformer DS 4-23 screener crusher with XHD60 blades

Problem

Wet, lumpy contaminated sludge material was causing delays to the composting process of a Swedish company.

Solution

The material was screened, shredded and aerated using an ALLU Transformer screening bucket which enabled composting to be accomplished more quickly, effectively and efficiently.

Benefit

The entire composting operation is no longer hindered by wet clumps of sludge. The process is now more efficient as all screening, shredding and aerating is done in a one-step operation, making composting and material reuse faster and more effective.   TRANSFORMING YOUR EFFICIENCY.

Related Products

Fallstudie

ALLU TRANSFORMER – RECYCLING VON ABBRUCHMATERIAL

Finland

Material Demolition waste

Industrie Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Crushing

Funktion Crushing, Screening, Waste material handling

Modell ALLU Transformer DN 3-17 screener crusher with TS 25 crushing Axe blade setup

Problem

On a site set aside for construction, demolition waste, including concrete, wood, metal and fines cannot be processed further, with the area needing to be cleaned and the material dealt with before any new buildings could be built. 

Solution

The waste was processed with an ALLU Transformer screener crusher. About 30% of the material could be reused as a construction material, with about 10%, including the wood and metal, being separated and recycled properly. The rest of the material comprised of concrete which was crushed and reused as sub base and for foundations.

Benefit

By processing the waste with the ALLU Transformer screener crusher, there were considerable savings made in landfill fees and transportation costs as only about 10% was transported to landfill. The rest of the material was reutilized on the new construction site.   TRANSFORMING YOUR GREEN CREDENTIALS.

Related Products

Verarbeitung von Bauschutt

Verarbeiten Sie Bauschutt effizient mit den ALLU Sieb- und Brecherlöffeln. Trennen Sie Bewehrungsstahl, zerkleinern Sie Beton und verwenden Sie Materialien direkt vor Ort wieder – so senken Sie die Kosten und minimieren Deponieabfälle.
Fallstudie

Sieben und Mischen von Bauschutt

Italien

Material Bauschutt

Industrie Sieben, Umgang mit Abruchmaterial, Zerkleinern

Anwendungsbereich Zerkleinerung

Funktion Zerkleinerung, Siebung, Materialumschlag

Modell ALLU Transformer DS 2-17 Sieb- und Brecherlöffel mit TS25

Die Herausforderung: Ein teures Abfallproblem auf der Baustelle

In Italien stand ein Bauunternehmen vor einem allzu häufigen Problem in der Branche – Berge von gemischtem Abfall häuften sich auf der Baustelle. Das Material bestand aus einer Mischung von Beton, Bewehrungsstahl und anderem Bauschutt, wodurch die Entsorgung zu einer großen Ausgabe wurde.

Der Transport des Abfalls zur Deponie war nicht nur teuer – er war zudem ineffizient. Zwischen Transportkosten, Deponiegebühren und verschwendetem Material verlor das Projekt sowohl Zeit als auch Geld. Das Team benötigte eine Methode, Abfall direkt vor Ort zu verarbeiten, statt ihn teuer entfernen zu lassen.

ALLU in Construction Waste Processing

Die Lösung: ALLU Transformer DS 2-17

Um die Kontrolle über den Abfall zu gewinnen, statt ihn einfach zu managen, setzte das Unternehmen einen ALLU Transformer DS 2-17 mit TS25-Messersatz ein. Der Schaufelaufsatz ermöglichte es, alle Materialien in einem Schritt zu verarbeiten, wodurch kein zusätzliches Zerkleinerungsgerät oder separate Verarbeitungseinheit erforderlich war.

  • Beton wurde in kleinere Fraktionen zerkleinert, die als Unterbau und Auffüllmaterial wiederverwendet werden konnten.
  • Bewehrungsstahl und Metalle wurden direkt bei der Siebung separiert, was ihre Sammlung und das Recycling erleichterte.
  • Feinmaterialien wurden gesiebt und wiederverwertet, wodurch der tatsächliche Abfall auf ein Minimum reduziert wurde.
Rebar and metals were separated directly during screening, making them easy to collect and recycle.

Die Ergebnisse: Keine Deponiegebühren, kein verschwendetes Material

Mit ALLU konnte das Unternehmen Deponiegebühren eliminieren, Transportkosten senken und Abfall in wiederverwendbares Material für den Neubau verwandeln. Statt Trümmer als Belastung zu behandeln, wurde effizient vor Ort verarbeitet – Ausfallzeiten wurden reduziert und die Nachhaltigkeit gesteigert.

Concrete was crushed into smaller fractions that could be reused as sub-base and fill.
Fine materials were screened and repurposed, reducing actual waste to a bare minimum.

ALLU im Bereich Bau- und Abbruchabfälle

Für Abbruch- und Bauprojekte bedeutet effiziente Abfallverarbeitung niedrigere Kosten, schnellere Abläufe und eine geringere Umweltbelastung. ALLU-Siebe- und Zerkleinerungsaufsätze ermöglichen Auftragnehmern, Materialien in einem Schritt zu sieben, zerkleinern und zu trennen – wodurch mehrere Maschinen überflüssig werden. Ob mit Bewehrungsbeton, Ziegeln, Asphalt oder Abbruchmaterial – ALLU hilft, Abfall in vor Ort verwendbares Material zu verwandeln.

Verwandte Produkte

Schaufelseparator – D-Serie

Träger 6 – 45 t
Die vielseitigen Schaufelseparatoren der Baureihen DN, DS und DH eignen sich für eine Vielzahl von Anwendungen und gewährleisten eine hochwertige Materialaufbereitung vor Ort.

Weitere Fallstudien

Wir lösen Probleme

ALLU DS 3-23 verarbeitet recycelten Asphalt in Finnlands größtem Asphaltwerk | Asfalttikallio

Asphaltrecycling: Finnlands größte Anlage

Finnlands größter Asphaltanbieter Asfalttikallio setzt den ALLU DS 3-23 ein, um kalt gefrästen Asphalt in hochwertiges Produktionsmaterial zu verwandeln. In der modernen Anlage in Ylöjärvi wird recycelter Asphalt effizient und…

Kundenbericht lesen
rohrleitungsbettung-in-schweden

Bettung von Rohrleitungen in Schweden

Bei einem Wohnungsbauprojekt auf der schwedischen Insel Öland setzte NCC für eine Wasserleitung auf innovative Materialaufbereitung. Mit zwei ALLU-Schaufelseparatoren – dem Modell DS4-12 für Hauptgräben und dem Modell DN3-12 für kleinere…

Kundenbericht lesen
Umwandlung von recyceltem Boden in nützliche Produkte wie Gülle und Gartenmischungen

Bodenrecycling in Australien

Soil Recycling Co. ist Victorias führendes Unternehmen für Bodensiebung und -recycling und setzt sich dafür ein, Boden als wertvolle Ressource zu erhalten, anstatt ihn auf Deponien zu entsorgen.

Kundenbericht lesen
Fallstudie

ALLU TRANSFORMER ZUM SCHUTZ DER URSPRÜNGLICHEN ARTENVIELFALT

Finland

Material Soil contaminated with invasive plants

Industrie Aufbereitung von Böden, Sieben, Umgang mit Abruchmaterial

Anwendungsbereich Screening

Funktion Screening, Soil Processing, Waste material handling

Modell ALLU Transformer DL 2-17 screening bucket with TS25 blade setup

Problem

Non-native species, which could destroy native fauna and flora, were found growing in a nature reserve. In order to keep the nature reserve intact and to preserve its biodiversity, the invasive plants had to be separated from the soil which would then be returned to the ground.

Solution

The surface layer of the earth was removed using a backhoe bucket, which removed the non-native species with their roots intact. The ALLU Transformer screening bucket was then used to screen the material and to separate the soil from the contaminants which was then reinserted into the ground and plant residue removed.

Benefit

The ALLU Transformer screening bucket was an effective solution for removing the non-native species, proving in a limited space to be a highly mobile space-saving solution.   TRANSFORMING YOUR GREEN CREDENTIALS.

Related Products